Hilsen Technical Kit (ESK Contractors)

Application Fall arrest, work positioning 

Attachment Dorsal position (for fall arrest), frontal chest (partial fall arrest), frontal waist (restraint and rescue)

Other features Flame retardant and anti-static webbing

Adjustment Leg straps and shoulder straps (standard buckles), carabiner connector in front (easy fitment), waist belt (quick release buckles)

a. Eskom Type Harness (4-point)
b. Lanyard SC2 (Adjustable)
c. Work Positioning Lanyard (Webbing type) 
d. Climbing Slings150cm (x2)
e. Gear Bag 50

Sizing Small, medium, large, XL and 2XL 

Component   Material properties
Primary webbing: Polyester 44mm wide with breaking strength of 22kN
Steel dee ring: Breaking strength of 3 ton
Standard buckle: Alloy steel 2/3 bar buckle so suit 44mm webbing
Plastic insert: Polypropylene molded insert
Carabiner: Steel screwgate carabiner with breaking strength of 22kN
Yarn: Polyester thread with colour contrasting to webbing colour
Label: Textile material 40mm wide with thermal transfer
Padding: High density foam padding 6mm
Quick release buckle: Alloy steel bayonet type buckle
Gear loop: Webbing loop 25mm with tubular PVC sleeve
Hook: Steel double action scaffold hook with breaking strength of 22kN
Tear webbing: Polyester 44mm wide manufactured to perform to SANS 50355:2003 Energy absorbers
Heat shrink Clear plastic sleeve 67mm

Disclaimer and product limitations
Maximum weight of user (including clothing, PPE and tooling) is 100kg up to Fall Factor 1, and 120kg up to Fall Factor 2.
Adequate training on correct use of this equipment must be provided to the user by a competent person before this equipment is issued for use. Simply reading the equipment user instructions does not suffice as adequate training. This equipment must not be used by a person with any medical condition that could affect their safety when using the equipment in normal or emergency use.
It is recommended that at least every three months the fall arrest system (or component) or other equipment be inspected by a competent person. This equipment is intended to be used for ‘fall arrest’, ‘work restraint’ and/or ‘rope access’ as indicated. This equipment is not intended to be used for any other purpose other than indicated and may not be used outside of its limitations. This
equipment becomes obsolete 5 years from manufacture date, regardless of the condition of the equipment. This equipment must be used strictly in accordance with the instructions given and without deviation. This equipment is used entirely outside of the manufacturers control and accordingly the manufacturer cannot be held liable for any loss, claim or liability arising from any failure of this
equipment from any cause whatsoever.